Volume 18 Issue 2
Published: 2025-06-25
Contents
Article
Theoretical Determination of the formability of (AA5182 / Polypropylene/ AA5182)sandwich sheets using different yield criterion
Anas Obied Balod,
AbstractThe effect of anisotropic yield criteria is very efficient in theoretical determination of limits strain of forming limit diagram(FLD) for sheet metals. In this paper the forming limit...
DOI: 10.33899/rengj.2010.28257
Effect of Application Uniformity on Production under Deficit Sprinkler Irrigation
Nawal Mohammed Jajjo, Basim M. Naseef Al-Zaidi,
AbstractThe study aims to develop a computer model for assessing the effect of uniformity and deficit irrigation on farm crop production. The formulation of the model is based on the concept of...
DOI: 10.33899/rengj.2010.28172
Range of Contaminant Transport in Soil Under Saturated/ Unsaturated Conditions With Case Study
A. A. Khalil, A. A. AL-Daood, S. A. A. Khattab,
AbstractContaminant movement through soil and groundwater contamination are one of the common environmental problems nowadays. Leakage of toxic fluids into the soil and groundwater could create a...
DOI: 10.33899/rengj.2010.28274
Effect of Personal Aptitude on Creative Fluency in Architectural Design The Students and Graduates of the Department of Architecture in Mosul
Farhan Awad Jasim,
AbstractThe research handles creation as a personal ability focusing on the study of creative fluency as the most important ability in creation and in the creative architectural practice. Fluency...
DOI: 10.33899/rengj.2010.28188
Enhancement Of Compression Zone Of Reinforced Concrete Section Due To Camber
Kanaan Sliwo Youkhanna Athuraia,
An attempt is made to study the effect of camber on compression zone of reinforced concrete section at mid-span of a beam. This is done by deriving formulas (based on strain measurements) to...
DOI: 10.33899/rengj.2010.28275
Studying the Corrosion of Graphite Containing pearlitic Cast Irons in Sandy Soil
Sabhan H. AL-Rifay, Abdulhaqq A. Hamid, Sobhi I. Ibrahim,
AbstractWide range of industrial and engineering applications for graphite containing cast irons and the harmful effects of corrosion environments on these important engineering materials, make it...
DOI: 10.33899/rengj.2010.28170
Effect of Lip Slope For Side Weir on Flow Characteristics
Mwafaq Younis, Inam Ali Kasem, Ahmed Y. Mohammed,
This paper studies the performance of side weirs by changing the end lip slope of this weir using three angles (00,30,60) opposite flow direction, depending on Froude number and slope of side weir...
DOI: 10.33899/rengj.2010.28186
Multi-Basis Wavenet-Based Stator Resistance Identification in DTC Induction Motor Systems
Jassim M. Abdul-Jabbar,
The performance of direct torque controlled (DTC) induction motor system is greatly affected by the change of the motor stator resistance especially when the motor runs at low speeds. A new...
DOI: 10.33899/rengj.2010.28250
Student Interpersonal Control Mechanization in Environment, Human and Build Variables of University Buildings, Assessment of Local Reality in College of Administration & Economic in Mosul University As A model.
Nasma M.M. Thabit,
AbstractInterpersonal control mechanization as concept is a proposition presented clearly in the architectural thoughts in the second half of 20th century. The environment, human and build...
DOI: 10.33899/rengj.2010.28192
The homes of the Prophet (may Allah bless him and grant him salvation) are the second innovation of Islamic Architecture
Hafsa Ramzi Alomari, Anwar Meshal,
Abstract The homes of the Prophet () are innovation of Islamic architectural in home design in the (mental and physical) sides. Research aims to find a scenario for the homes of the Prophet (),...
DOI: 10.33899/rengj.2010.28191
Analysis of Rainfall Drought Periods in the North of Iraq Using Standard Precipitation Index (SPI)
Anass M. M. Rasheed,
In this research, the standard precipitation index (SPI) was used to analyze rainfall records between 1941 - 2002 for nine metrological stations in the north of Iraq. In addition, digital maps of...
DOI: 10.33899/rengj.2010.28187
A Comparison of Formability of Commercial Pure Aluminum Sheet by Using Punch and Hydraulic Bulging
W. J. Ali, L. Kh. Haider
AbstructThe sheet meal forming are the most widely used in the metal industries. The forming limit curve(FLC) is considered as the important mean of measuring the formability of sheet metal. In...
DOI: 10.33899/rengj.2010.28167
Fpga Based Implementation Of Concatenation Matrix
Fakhraldeen H. Ali, Amar I. Dawod,
AbstractThe computer graphics system performance is increasing faster than any other computing application. The Geometric transformations and animation are one of the most important principle of...
DOI: 10.33899/rengj.2010.28255
Protection Of Open Channels Using Gabions
Khalid Yassin Taha Ali, Bahzad Mohammad Ali Noori,
This research investigates open channel protection using gabions by conducting a series of laboratory tests on a trapezoidal channel with fixed width and bed slope. In this study, values of failure...
DOI: 10.33899/rengj.2010.28176
Effect of Planting Design in Changing Architectural Perception in Landscape
Dr. Ahmed Yousif ALOmary, M. H. Aljwadi,
Abstract The study deals with architecture and plant relations, aims to help the landscape designers to achieve integration between architecture and planting design of surrounding landscapes in...
DOI: 10.33899/rengj.2010.28194
