Volume 24 Issue 2
Published: 2025-06-25
Contents
Review Paper
Natural Products Applications in Orthodontics: A Review
lara Riyadh Al-Banaa, Saif Sufyan Alsoufy, Ali Rajih Al-Khatib,
Aims: Natural products are used in dentistry to treat various dental diseases. They are considered an active alternative to antibiotics and could offer prevention and therapeutic approaches for...
DOI: 10.33899/rdenj.2022.135078.1172
Treatment Modalities of Apexogenesis: An Overview
Abeer Ahmed Al_Gbouri, Ali R. Alkhatib,
Permanent teeth with incomplete root formation subjected to pulp exposure due to caries or trauma, this cause interruption of root development and leave it with an open apex. Apexogenesis aim to...
DOI: 10.33899/rdenj.2024.137277.1182
Research Paper
The Effect of Adding Hydroxyapatite Nanoparticles on Hardness of Heat Cured Acrylic Resin Material.
Ammar Kh Al-Noori, Saif Mohanad Al_Obaidy,
Aims: To investigate the effects of the incorporation of hydroxyapatite nanoparticles (HA NPs) with size (20 nm) at two concentrations (0.5% and 1%) on the hardness of heat-cured acrylic resin....
DOI: 10.33899/rdenj.2022.134391.1168
Flexural and Impact Strength of Poly Methyl Methacrylate Incorporated with Hydroxyapatite Nanoparticles.
Ammar Kh Al-Noori, Saif Mohanad Al_Obaidy,
Aims: To investigate the effects of the incorporation of hydroxyapatite nanoparticles (HA NPs) with size (20 nm) at two concentrations (0.5% and 1%) on the flexural strength and impact strength of...
DOI: 10.33899/rdenj.2022.134388.1166
Does the Addition of Seashell or Zirconium Oxide Nanoparticles at Different Concentrations Improving Tensile Bond Strength of Orthodontic Adhesive? In-vitro study.
Neam Agha, Alaa Gharis Adnan
Aims: The study aimed to assess the tensile bond strength of modified-Heliosit orthodontic adhesive with different concentrations of seashell or zirconium oxide nanoparticles. Materials and...
DOI: 10.33899/rdenj.2022.136509.1176
3D Finite Element Analysis of Implant-supported Fixed Partial Denture Frameworks Fabricated from Fiber-reinforced Composite and Polyetheretherketone.
Azher Mazin Agha, Ahmed Al-Ali, Ayad A Abdul-Razzak,
Aims: The purpose of this study was to test different design parameters for ISFPD frameworks fabricated from fiber-reinforced composite and polyetheretherketone. Material and Methods: 12 different...
DOI: 10.33899/rdenj.2024.136413.1175
Comparing Between Different Impressions Materials and Techniques for the Accuracy of Implant Position Transfer
Nagham Hazim kassab, Hasan Khiraldeen Mohialdeen, Ahmed Abduljawad Ismail Alubaidi,
Aims: This study aimed to compare the accuracy of implant position transfer using three impression materials with two techniques. Materials and methods: A master model was fabricated with two...
DOI: 10.33899/rdenj.2022.136706.1177
A Comparative Evaluation of the Accuracy between the Extraoral Scanner (Rainbow) and Intraoral Scanner (Medit I500) Digital Impressions in Vitro
Nagham Hazim kassab, Hasan Khiraldeen Mohialdeen, Ahmed Abduljawad Ismail Alubaidi,
Aims: To compare the extraoral and intraoral scanners' accuracy in obtaining implant impressions using an in-vitro reference model. Materials and methods: An upper master model was fabricated with...
DOI: 10.33899/rdenj.2022.136720.1178
Comparison of Shear Bond Strength of Self-Adhesive Resin Cement and Conventional Resin Cement Bonded to Lithium Disilicate Glass Ceramic with Different Surface Treatments: In Vitro Study
Abdulkareem Ramadhan Ibrahim, Mumtaz Abdulazeez Sadeeq,
Aims: to measure the shear bonding strength of self-adhesive resin-cement bonded to lithium disilicate glass-ceramic with different surface treatments and compare it with that of conventional...
DOI: 10.33899/rdenj.2023.137018.1179
Effect of Gaseous Ozone on Surface Hardness and Surface Roughness of Heat Cure Acrylic Resin
Baraa Hasan Kadhim, Wasmaa Sadik Mahmood,
Aims: to assess the effects of gaseous ozone and microwave exposure (as a positive control) on surface hardness and surface roughness of heat cure acrylic resin. Materials and Methods: A total of...
DOI: 10.33899/rdenj.2023.137166.1181
Evaluation of Surface Microhardness of Artificial White Spot Lesion Treated with Three Different Treatment Approaches. An in-vitro study
Afrah Al Hamdany, Aya Abdule khalik AL-TAEE,
Aims: The purpose of the current study is to compare the impact of three different treatment approaches on the surface microhardness of the enamel of third molar teeth. Materials and Methods: An in...
DOI: 10.33899/rdenj.2024.137614.1183
Translucency of Nanoparticles Reinforced Denture Base Materials
Radhwan H Hasan, Ghadaq Muyser,
Aims: To evaluate the effect of adding salinized zirconium oxide (ZrO2) and silicon oxide (SiO2) nanoparticles in two concentrations on the translucency of heat-cured denture base material....
DOI: 10.33899/rdenj.2023.137801.1186
Effect of Treated Fiber Reinforcement on the Flexural Strength of Heat-Cured Denture Base Resin Materials
Nagham Hazim kassab, Reem Majeed Majeed, Ragheed Kassab,
Aims: This study was carried out to evaluate the flexural strength of heat-polymerized acrylic denture base material that is readily accessible commercially after strengthening with two kinds of...
DOI: 10.33899/rdenj.2023.137992.1193
Evaluation the Effect of Fiber Reinforcement Materials on Flexural Strength of Heat Cured Denture Based Resin Materials
Nagham Hazim kassab, Reem Majeed Majeed, Ragheed Kassab,
Aims: To assess the effect of fibres reinforcement materials on flexural strength of heat cured denture-based resin. Materials and Methods: Sample of heat-cured acrylic resin were created and...
DOI: 10.33899/rdenj.2023.138002.1194
Enhancement of dental implant stability using Saccos membrane in a sheep animal model
RAYAN SALIM HAMED, Amar Al-Bazzaz,
Aims: The current study aimed to compare implant stability and bone density using a Concentrated Growth Factor placed before implant placement in the iliac crest of sheep. Materials and Methods:...
DOI: 10.33899/rdenj.2023.138714.1196
Effects of Modifying Orthodontic Adhesive by Thymus Vulgaris and Lavandula Angustifolia Essential Oils on Compressive Strength
Ali R Al-Khatib, Sam'an Malik. Masudi, Reem Thamer Musleh,
Aims: The aims of the current study were to investigated and compared the effects of different concentrations of Thymus vulgaris and Lavandula angustifolia essential oils incorporated in...
DOI: 10.33899/rdenj.2023.139207.1202
Cyclic Fatigue Resistance of 2 Shape Endodontic System
Ahmed Mustaf Mohammed, Ashraf Salim Alchalabi, Abdulhaq A. Suliman,
Aims: This study aimed to evaluate the effect of different tapers (4% and 6%) on the cyclic fatigue resistance of the 2Shape endodontic system using three types of canal curvature 45,60, and 90....
DOI: 10.33899/rdenj.2023.139208.1201
Local Effect of Insulin on Healing of Extraction Socket of Diabetic Rabbits (Experimental Study)
Waqass Thanoon, Omer W Majid, Ali Khalil Marie,
Aims: The present study aims to investigate the effect of insulin on the healing of dental sockets in diabetic rabbits. Evaluating oral mucosa healing and bone regeneration of the healing process...
DOI: 10.33899/rdenj.2023.139631.1203
Effect of Nandrolone Decanoate on Some Biochemical Markers When Used as Adjuvant Therapy for Healing of Facial Muscle Wound
Faehaa Azher Al-Mashhadane, Tamarah Mazin Al-Abdullah,
Aims: to distinguish if the nanodrolone decanoate has any effect on the healing of facial muscular wounds which are one of the issues that dentists face, and it is a challenge to find a useful...
DOI: 10.33899/rdenj.2023.140735.1209
Biocompatibility and hard tissue-forming ability of CPP-ACP- and CPP- ACFP-modified calcium silicate-based cements
James Holden, Eric Reynolds, Alaa E. Dawood, David Manton, Peter Parashos, Rebecca Wong, Neil O'Brien-Simpson, William Singleton, David Stanton
Aims: To evaluate the biocompatibility and osteogenic potential of calcium silicate-based cements (CSCs) modified with casein phosphopeptide amorphous calcium phosphate (CPP-ACP) and casein...
DOI: 10.33899/rdenj.2024.151060.1264
