Volume 18 Issue 6
Published: 2025-06-25
Contents
Article
Gap Acceptance, and Traffic Safety Analysis On U-Turn Median OpeningsOf Arterial Roads
Dr. Abdul Khalik Al-Taei,
ABSTRACTIn this study, eight locations on U-turn median openings in Duhok City were investigated about gaps or lags of traffic opposing and delaying traffic turning left. Other data was collected...
DOI: 10.33899/rengj.2010.34824
INFLUENCE OF THE FORMING PROCESSES ON THE RATE OF CORROSION OF GALVANIZED HIGH STRENGTH LOW ALLOY STEEL SHEETS
Dr. F. M. Abdulla, A. M. Ali, H. A. Ibrahim,
ABSTRACT:The effect of deformation on the corrosion of galvanized high strength low alloy steel sheet is studied. Specimens in the uniaxial, plain and biaxial strains were stretched by a...
DOI: 10.33899/rengj.2010.34930
Frequency Analysis of Hydrologic Drought (Case Study)
Dr. Kamel A. Al-Mohseen,
ABSTRACTIn this paper, the possibility of studying the occurrence probabilities of hydrologic drought events has been explored. The obtained results were based on the case study of the annual...
DOI: 10.33899/rengj.2010.35187
Mole Fraction Effect on Semiconductor Optical Amplifier Specifications
Khalis A. Mohammed,
AbstractSemiconductor optical amplifier had been studied theoretically using the traveling wave equation. The study took into consideration the many parameters that could affect the operation of...
DOI: 10.33899/rengj.2010.34862
Design and FPGA Implementation of Takagi- Sugeno Fuzzy Controller Based on LUTs
Rasha Ilham Majeed,
AbstractIn this paper, an approach for designing Fuzzy Controller based on Takagi-Sugeno inference engine with high computational speeds in architecture is proposed. The work focuses on advantages...
DOI: 10.33899/rengj.2010.34908
EMBEDDED FORMULATION OF PRESTRESSED TENDON IN 3D – BRICK ELEMENT
Dr. Mohamad N. Mahmood, Ayad B. Behnam,
AbstractIn the present work a formulation of the reinforced bars and prestressed tendons embedded in the brick element is developed and used for the nonlinear analysis of reinforced-prestressed...
DOI: 10.33899/rengj.2010.34783
FPGA Based Implementation of Convolutional Encoder- Viterbi Decoder Using Multiple Booting Technique
Yahya Taher Qassim, Dr. Dhafir A. Alneema,
AbstractConvolutional encoding is considered one of the forward error correction schemes. It is an essential component of wireless communication systems such as the third generation (3G) mobile...
DOI: 10.33899/rengj.2010.34888
Behavior of Lime Stabilized Gypseous Soil Beams Under static Loads
A.H. Al Zubaydi, M. T. Al- Layla Professor,
AbstractThis work aims to study the stress-strain curves of soil samples subjected to tensile stress. The samples (50*50*300 mm) were prepared from lime stabilized gypseous soil using (3%) lime as...
DOI: 10.33899/rengj.2010.35180
Processing Lightweight Aggregate to produce Lightweight Concrete
Daad Mohamed Daood, Dr.Nadia Salim Esmaeil,
AbstractThe modern techniques development used in the production of concrete led to the emergence of types of concrete with different densities compared to normal concrete . This research aimed...
DOI: 10.33899/rengj.2010.35172
OPTIMUM COST DESIGN OF R. C. ONE WAY SLABS
Rabi M. Najem,
AbstractIn this research , the formulation of optimum cost design for one way reinforced concrete slabs is presented , since it is useful and have a widespread usage among practicing engineering...
DOI: 10.33899/rengj.2010.34788
OPTIMAL IRRIGATION PROGRAMMING
Dr.Eman Hazim Sheet,
A mathematical optimization model for optimum weekly irrigation water requirements for maize crop at Mosul area is developed. The main objective function is to maximize profit. The growing season...
DOI: 10.33899/rengj.2010.35198
Handoff Priority Schemes in Wireless Mobile Cellular System
H. A. Al-Tayyar, S. A. Mawjoud,
AbstractHandoff operation, algorithm and modeling is vital in wireless cellular system. Two fundamental handoff procedures exist. The first model concerning the propagation environment and the...
DOI: 10.33899/rengj.2010.34852
Modeling of ultimate load for R.C. beams strengthened with Carbon FRP using artificial neural networks
Dr. Salim T.Yousif, Majid A. AL- Jurmaa, Majid A. AL- Jurmaa
AbstractThe use of carbon fiber reinforced composite materials is an accepted technology that is being used in practice to strengthen existing reinforced concrete (R/C) elements. An artificial...
DOI: 10.33899/rengj.2010.34813
The Efficiency of the Spatial Distribution of Civil Defense Stations in Mosul City
Ahmed A. Alfakhry, Dr. Turki Hassan Ali, Faris Attallah,
Abstract Civil defense stations in cities are one of the basic emergency services that should be considered in mind of every urban designers and planners who is going to design and develop any city...
DOI: 10.33899/rengj.2010.35204
Effect of High Temperature on Engineering Properties of Light Weight Blocks Concrete
R. B. Abdurrahman, Z. A. Mohammed, Dr. A. H. Ahmed,
AbstractLight weight concrete blocks have an important role in the last years for it is practical and economical benefit in the building construction. An It has light density providing high thermal...
DOI: 10.33899/rengj.2010.35165
