Effects of Acrylonitrile-Butadiene-Styrene on Sustainable Paving Mixtures

Section: Research Paper
Issue
Vol. 29 No. 2 (2024): Volume 29 Issue 2
Published
Sep 1, 2024
Pages
126-137

Abstract

This study evaluated the effects of acrylonitrile- butadiene- styrene (ABS) polymer on the paving mixtures made with calcium carbonate (CaCO3) as a common filler and Blowdown (B) waste as a sustainable filler. Both mixtures, Unmodified and ABS-modified containing both fillers were subjected to Marshall stability (MS), Marshall Quotient (MQ), tensile strength (TS), tensile strength ratio (TSR), cracking tolerance index (CTindex) and deformation strength (DS) in Kim tests. Statistical analyses of the results show that a B-mixture owned higher MS and DS, with lower TSR and CTindex than CaCO3 mixture, while ABS modified-B mixture depicted higher marshall stability, cracking and fatigue resistance with lower moisture, rutting resistance comparable to the ABS-modified CaCO3-mixture. In addition, B-mixture is a cost-effective solution and eco-friendly than CaCO3 mixture for pavement application since its properties located within the specification's limits

References

  1. A. I. Al-Hadidy, M. G. Jamel, T. Yi-qiu, D. Zejiao, and W. Jia-ni, Laboratory Investigation on Rheological Characteristics of Asphalt Mastic with Waste Powder Materials from Mosic Tiles as Sustainable Filler, Al-Rafidain Eng. J., vol. 28, no. 1, pp. 109115, 2023, doi: https://doi.org/10.33899/rengj.2023.138909.1241.
  2. S. K. Rasheed and A. I. Al-Hadidy, Evaluation of sulfur waste as sustainable mineral filler in Asphalt paving mixtures, Int. J. Pavement Res. Technol., pp. 114, 2022, doi: https://doi.org/10.1007/s42947-022-00229-z.
  3. A. I. Al-Hadidy, Laboratory Evaluation of Sulfur Waste Asphalt Mixtures Containing SBS and Waste Polypropylene Polymers, Int. J. Pavement Res. Technol., pp. 115, 2022, doi: https://doi.org/10.1007/s42947-022-00252-0.
  4. ASTM, Standard test method for resistance to degradation of small-size coarse aggregate by abrasion and impact in the Los Angeles machine, C131, ASTM International, West Conshohocken, PA. 2006.
  5. ASTM, Standard test method for determining the percentage of fractured particles in coarse aggregate. D5821, ASTM International West Conshohocken, PA, USA, 2017.
  6. ASTM, Standard test methods for uncompacted void content of fine aggregate (as influenced by particle shape, surface texture, and grading). C1252, ASTM International West Conshohocken, PA, USA, 2017.
  7. ASTM, Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate, C88, ASTM International: West Conshohocken, PA, USA. 2013.
  8. ASTM, Standard test method for relative density (specific gravity) and absorption of coarse aggregate. C127, ASTM International, West Conshohocken, PA, 2015.
  9. ASTM, Standard test method for relative density (specific gravity) and absorption of fine aggregate. C128, ASTM International, West Conshohocken, PA, 2015.
  10. A.-H. AI, A. F. Jasim, and A. M. Rashed, Mechanistic analysis and durability of thiophene paving mixtures, J. Mater. Civ. Eng., vol. 34, no. 7, p. 6022002, 2022.
  11. S. S. Shareef, A. H. Thaeir, and O. A. Motea, Concentration and study of the carbon-sulfur residues resulting from the thermal purification of Fracsh sulfur in the Al-Mishraq sulfur mine, J. Surv. Fish. Sci., vol. 10, no. 1S, pp. 53555367, 2023.
  12. A. I. Al-Hadidy, Influence of polyethylene and sulfur wastes on characteristics of asphalt paving materials. MSc thesis, College of Engineering, Civil Engineering Department, 2001.
  13. S. cooperation of road and bridges (SCRB), Hot mix asphaltic concrete pavement. Iraqi standard specification, Ministry of Housing and Construction. Department of Design and Study, Section R-9., 2007.
  14. E. Masad, K. L. Roja, A. Rehman, and A. Abdala, A review of asphalt modification using plastics: a focus on polyethylene, Texas A&M Univ. Qatar, Doha, 2020.
  15. ASTM, Standard Test Method for Evaluating the Compatibility of Polymers and Asphalt Binders. ASTM International Standard D6230-22, 2022.
  16. N. C. for C. L. (NCCL), Materials and Construction works specification, Ministry of Housing and Construction and Public Works. Directorate and Technical Affairs. Baghdad, Iraq, 2018.
  17. ASTM, Standard test method for penetration of bituminous materials. D5/D5M, ASTM International, West Conshohocken, PA, 2020.
  18. ASTM, Standard test method for softening point of bitumen (ring-and-ball apparatus). D36/D36M, ASTM International, West Conshohocken, PA, 2020.
  19. ASTM, Standard test method for ductility of asphalt materials. D113, American Society for Testing and Materials, West Conshohocken, PA, USA, 2017.
  20. ASTM, Standard test method for viscosity determination of asphalt at elevated temperatures using a rotational viscometer. D4402/D4402M, ASTM International, West Conshohocken, PA, 2023.
  21. ASTM, Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer. D6084, ASTM International, West Conshohocken, PA, 2021. doi: https://doi.org/10.1520/d6084_d6084m-21.
  22. ASTM, Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures. D 6927, ASTM International, West Conshohocken, PA, 2022.
  23. A. I. Al-Hadidy, Experimental investigation on performance of asphalt mixtures with waste materials, Int. J. Pavement Res. Technol., pp. 113, 2023, doi: https://doi.org/10.1007/s42947-023-00288-w.
  24. A. I. Al-Hadidy, M. G. Jamil, O. A. Salih, and A. T. Hameed, SUSTAINABLE RECYCLING OF POLYETHYLENE WASTE THROUGH UTILIZATION IN ASPHALT PAVING APPLICATIONS, J. Appl. Eng. Sci., vol. 21, no. 2, pp. 428439, 2023, doi: https://doi.org/10.5937/jaes0-39960.
  25. A. H. Mrema, S.-H. Noh, O.-S. Kwon, and J.-J. Lee, Performance of glass wool fibers in asphalt concrete mixtures, Materials (Basel)., vol. 13, no. 21, p. 4699, 2020, doi: https://doi.org/10.3390/ma13214699.
  26. ASTM, Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures. D6931, ASTM International, West Conshohocken, PA, 2017.
  27. H. Ziari, M. Orouei, H. Divandari, and A. Yousefi, Mechanical characterization of warm mix asphalt mixtures made with RAP and Para-fiber additive, Constr. Build. Mater., vol. 279, p. 122456, 2021, doi: https://doi.org/10.1016/J.CONBUILDMAT.2021.122456.
  28. ASTM, Standard test method for effect of moisture on asphalt concrete paving mixtures. D4867/D4867M, ASTM International, West Conshohocken, PA, 2022.
  29. ASTM, Standard test method for determination of cracking tolerance index of asphalt mixture using the indirect tensile cracking test at intermediate temperature. D8225, ASTM International West Conshohocken, PA, 2019.
  30. M. LLC, Minitab. 2021.
  31. A. I. Al-Hadidy, Performance of SBS-HMA mixes made with sasobit and zeolite, J. Mater. Civ. Eng., vol. 32, no. 10, p. 6020017, 2020, doi: https://doi.org/10.1061/(asce)mt.1943-5533.0003362.
  32. ASTM, Standard practice for determining the separation tendency of polymer from polymer modified asphalt, 2005.
  33. I.a.T.i.K., Guideline for construction of asphalt concrete pavement. Ministry of Land, 2017.
  34. M. A. Al-Mohammed and A. I. Al-Hadidy, Durability and Rutting Resistance of SBS-Modified Asphalt Mixtures Containing Blowdown as a Sustainable Filler, Al-Rafidain Eng. J., vol. 28, no. 2, pp. 4857, 2023, doi: https://doi.org/10.33899/rengj.2023.142194.1273.
  35. P. S. Chowdhury, S. L. A. Noojilla, and M. A. Reddy, Evaluation of fatigue characteristics of asphalt mixtures using Cracking Tolerance index (CTIndex), Constr. Build. Mater., vol. 342, p. 128030, 2022, doi: https://doi.org/10.1016/j.conbuildmat.2022.128030.
  36. F. Yin, R. West, B. Powell, and C. J. DuBois, Short-Term Performance Characterization and Fatigue Damage Prediction of Asphalt Mixtures Containing Polymer-Modified Binders and Recycled Plastics, Transp. Res. Rec., p. 03611981221143119, 2023, doi: https://doi.org/10.1177/03611981221143119.
  37. I. Asphalt, MS-2 asphalt mix design methods, Lexingt. Kentucky, USA, 2014.
  38. A.-H. A. Ibrahim, Effects of long-term aging on asphalt mixes containing SBS and PP-polymer, Int. J. Pavement Res. Technol., vol. 14, pp. 153160, 2021, doi: https://doi.org/10.1007/s42947-020-0089-x.
  39. M. I. Anwar, M. Arifuzzaman, and M. M. Rahman, Assessment of Environmental Impact and Energy Demand of Sulfur Modified Asphalt in Road Pavement, in 2020 Second International Sustainability and Resilience Conference: Technology and Innovation in Building Designs (51154), IEEE, 2020, pp. 16. doi: https://doi.org/10.1109/IEEECONF51154.2020.9319983.
  40. A. I. Al-Hadidy, Sustainable recycling of sulfur waste through utilization in asphalt paving applications, Int. J. Pavement Res. Technol., vol. 16, no. 2, pp. 474486, 2023, doi: https://doi.org/10.1007/s42947-021-00143-w.
  41. A. K. Cress, J. Huynh, E. H. Anderson, R. Oneill, Y. Schneider, and . Kele, Effect of recycling on the mechanical behavior and structure of additively manufactured acrylonitrile butadiene styrene (ABS), J. Clean. Prod., vol. 279, p. 123689, 2021, doi: https://doi.org/10.1016/j.jclepro.2020.123689.
  42. M. Q. Ali and G. J. Khoshnaw, Influences of polymer modifiers on Porous Hot Asphalt Mixture Property and Durability, Polytech. J., vol. 10, no. 2, p. 19, 2020, doi: https://doi.org/10.25156/ptj.v10n2y2020.pp126-131.
  43. G. H. Hamedi, A. Sahraei, and M. R. Esmaeeli, Investigate the effect of using polymeric anti-stripping additives on moisture damage of hot mix asphalt, Eur. J. Environ. Civ. Eng., vol. 25, no. 1, pp. 90103, 2021, doi: https://doi.org/10.1080/19648189.2018.1517697.

Authors

Abdulrhem Ibrahem Al-Hadidy

Civil Engineering Department, College of Engineering, University of Mosul, Mosul, Iraq

ORCID
Amani Ammar Al-Ttayiy

Civil Engineering Department, College of Engineering, University of Mosul, Mosul, Iraq

ORCID

Identifiers

https://doi.org/10.33899/arej.2024.147700.1343
Download this PDF file
PDF

Statistics

How to Cite

[1]
A. Ibrahem Al-Hadidy, عبدالرحيم, A. Ammar Al-Ttayiy, and أماني, “Effects of Acrylonitrile-Butadiene-Styrene on Sustainable Paving Mixtures”, AREJ, vol. 29, no. 2, pp. 126–137, Sep. 2024.
Crossref
Scopus
Google Scholar
Europe PMC